PLANET ICA-107P - Manual (Page 9)


5. Configuration
PLANET IP Camera provides GUI (Web based, Graphical User Interface)
for machine management and maintenance. To start the IP Camera
web configuration, please have the proper web browser installed on
computer for web management.
* Microsoft Internet Explorer 6.0 or higher.
Default IP address of IP Camera is 192.168.0.20. Please execute the
web browser, and type http://192.168.0.20 in the address bar to
login the IP Camera’s web configuration page.
The IP Camera will prompt for User Name and Password, please enter:
Admin as username and Admin as password to continue machine Web
Management.
If any difficulty is met, please refer to the following steps to establish
the connection:
- Your PC should be able to establish a physical connection to the IP
Camera. The PC and the IP Camera must be directly connected (using
the LAN port on the camera) or on the same LAN segment. That
is, the PC must be configured to an IP address and subnet mask in
192.168.0.x segment. For example: IP: 192.168.0.2, subnet mask:
255.255.255.0.
- The IP Camera must be installed and powered ON.
- If the IP Camera’s default IP Address
(192.168.0.20) is already
used by another device, the other device must be turned OFF until the
IP Camera is allocated a new IP Address during configuration.