PLANET ICA-4130S - Manual (Page 2)

Step 5 : Bring up the web page for further configuration
 Select the IP Camera you want to configure and input its IP address
into the browser search bar.
 The IP Camera will be connected via web browser automatically; the IP
Camera will prompt for logon user name and password. Please enter
admin as the default user name and password.
 When the device is logged on for the first time, the browser will prompt
to install controls; please click "click here to download and install
controls manually".
 Follow the prompts to install the controls. When the installation is
finished, a window as shown in the table below will appear. Please click
“Finish” and refresh the browser, and then you will see the video.
Note: If IE9 or higher version browser is used, it is suggested that the
PLANET camera web link should be added as a trusted site.
Appendix A : Default Setting
Default DHCP Client On
Default IP Address
192.168.0.20 – if DHCP does not exist in
the network
Default Login User Name admin
Default Login Password admin
Search Tools Smart Discovery Lite
Further Configuration
For detailed configuration, please check user’s manual on the bundled CD.
If you have any other question, please contact the dealer where you
purchased this product or you can contact PLANET directly at the following
email address: [email protected]