PLANET ICA-510 - Manual (Page 10)

10
Chapter 4. Setup Tool Installation and
operation
This chapter shows how to quick set up your IP surveillance product.
The IP surveillance product is with the default settings. However to
help you find the networked camera quickly the windows utility-Setup
Tool can search the cameras in the network that shall help you to
configure some basic setting before you started advanced management
and monitoring.
4.1 Setup Tool Installation
Note
In the installation steps below, this guide use ICA-510 as
the example. However, the steps for ICA-700 are similar.
Initial setup should be performed by using the supplied Windows-based
Setup Tool as follows:
1. Insert the bundled product CD into CD-ROM drive to launch the
autorun program.
2. Please click the IP camera model name.
3. When the web page displayed, select and click the “Setup Tool”
hyperlink on the menu to start the installation process.
Note
If the CD’s menu does not appear, click “Start” on the
task bar and select “Run” to type “X:\Utility\SetupTool\
SetupTool.exe”, assume X is your CD-ROM drive.
4. Click “Yes” to start the Setup Tool Installation.