PLANET ICA-5250V - Manual (Page 9)

9
4. The GUI of IP Installer is as follows (Default IP: 192.168.0.20).
z IP Installer will search all IP Cameras connected on LAN. The user can click
“Search Device” to search again.
z Click one of IP Cameras listed on the left side of IP Installer, then the network
configuration of that IP Camera will be listed on the right side. If parameters
change, click on “Submit”. Then, the network configuration will be changed.
Just click “OK” to reboot.
Please make sure the subnet of PC IP address and IP CAM IP address are the
same.
For Example:
IP CAM IP address: 192.168.0.20
PC IP address: 192.168.0.100
To Change PC IP addresses:
Control Panel  Network Connections  Local Area Connection Properties  Internet
Protocol (TCP/IP)  Properties