PLANET ICA-HM312 - Manual (Page 9)

14B
2.2 Physical Description
36B
2.2.1 Identification of ICA-HM312 cable
Interface Description
DC Power
(Power Jack, IR and IP
Camera)
The input power is DC 12V, 1A.
Note：ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
RJ-45
(LAN socket, PoE, IR and
IP Camera )
Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built auto-negotiation
protocol can detect or negotiate the transmission speed of the
network automatically. Please use CAT-5 cable to connect the
Network Camera to a 100Mbps Fast Ethernet network switch
or hub.
LAN LED (green color)
This LED will be flashing while network accessing via
Ethernet.
Power LED (orange color)
This LED is used to indicate whether DC power is on or not. In
addition, this LED will be flashing while the wireless accessing
of the Camera.
Note：ONLY use one power source, either from DC or from
802.3af Power over Ethernet.
9