PLANET ET-509A - Manual

1
ET-509A
TP-BNC Converter
ET-508 /ET-508S
TP-Fiber (Multi-mode / Single-mode)
IEEE802.3 Ethernet Converter
1. Overview
IEEE802.3 10Mbps Ethernet supports various type media for network connection such as
10Base-2, 10Base-T and 10Base-FL. The media converter is used to convert one type
media signal to other type equivalent that allows multiple type segments connect easily and
inexpensively. This converter can be used as a standalone unit or as a slide-in module to the
19" Media Chassis (up to 10 units) for use at a central wiring closet.
2. Model Description
Model Descripton Connector Type
ET-508S TP-FL (Fdx/Hdx supported) RJ-45 ↔ 10Base-FL ST (SM)
ET-508 TP-FL (Hdx) RJ-45 ↔ 10Base-FL ST (MM)
ET-509A TP-BNC RJ-45 ↔ 10Base-2 BNC
The available Fiber –optic mode
ST, MM ST type connector, Multi-Mode
ST, SM ST type connector, Single-Mode
3. Checklist
Before you start installing the Converter, verify that the package contains the following:
 The Converter
 AC-DC Power Adapter
 This User's Manual
 T-Connector(for ET-509A only)
Please notify your sales representative immediately if any of the aforementioned items is
missing or damaged.