PLANET WAP-8000 User Manual
Page 7
4. Locate an optimum location and use the provided Mounting kit to tie the WAP-
8000 to a pole.
Step3
Step1
Step2
Note
For secured reason, while install the CPE AP, please be aware for
the electric wires around, and tighten the pole.
Without tighten the CPE AP, the pole and the installed site is with
electric wire around, there could be danger of being hurt by falling
or lethal injury.
5. Connect the “LAN” port of PoE Injector to Ethernet hub, switch or PC on the
same LAN for management.
6. Connect the power adapter to the PoE Injector, and plug it into an AC outlet to
power on the WAP-8000.
Note
1. ONLY use the power adapter supplied with the WAP-8000. Other-
wise, the product may be damaged.
2. Strongly suggest using SFTP cable whether the cable exposed
outdoor for waterproof and avoiding thunder stroke.