PLANET WL-8310 - Manual (Page 10)

6
Chapter 2 Installation Procedure
Before you proceed with the installation, it is necessary that you have enough information
about the Wireless PCI Card. Use the Procedure described below to install the card under
Windows 98/Me/2000/XP/Server 2003.
Note: If you ever install the other Wireless Card before, please uninstall the existed
driver and utility first. If this is the first time to install this device, please refer to the
following steps to complete the installation.
2.1 Configuration Utility Installation
Please install the configuration utility before insert WL-8310 into the PCI slot of the computer.
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once
completed a menu screen will appear as follows.
2. Click on “Configuration Utility” hyper link in WL-8310 field to initiate the installation. If
the above screen is not shown, you can click the “Start” button and choose “Run”.
When the box appears, enter “E:\Utility\WL-8310\setup.exe” (Suppose “E” is your
CD-ROM drive). You will see the dialog box as the picture. Please click “Next” to
continue.