PLANET WNAP-7200 - Manual (Page 9)


3. Web Configuration
WNAP-7200 provides a user friendly interface for users to configure via web
browser. Please follow the below steps to configure WNAP-7200 basic settings.
1. It will take around 40 seconds to complete the boot up sequence after power on
from PoE.
2. Open your web browser and type default IP address of WNAP-7200
(http://192.168.0.1) into the “Address Field” of you web browser. Before
configuration, please make sure your PC’s IP address is under the same IP range
with WNAP-7200, such as 192.168.0.x.
3. After entering, fill the default username/password (admin / admin) and then
you can see the home page.