PLANET WPG-120 - Manual

1. Package Contents
WPG-120 x 1
Power Adapter (DC 6V, 0.8A) x 1
CD-ROM x 1 with User’s Manual, Quick Installation Guide,
WPG-120 Utility & Windows-XP Virtual Panel utility.
Quick Installation Guide x 1
VGA connector x 1
2. Physical Details
6V 0.8A
Reset Default Button
VGA Connector
POWER LED
Figure 1 Outlook of WPG-120
l
l
l
l
l
3. Installation
1) Plug WPG-120 to projector VGA connector or connect
projector VGA cable to WPG-120 VGA connector and turn
on projector power as Figure 2 below.
Figure 2 WPG-120 to Projector connection
Be noted, the connection can be a D-sub VGA device
supports 1024x768 (XGA) resolution or 800x600 resolution.
When connected, please make sure select the correct VGA
input source of the Projector.
2) Turn on WPG-120.
When Projector shows the default menu on the screen as
below, it indicates the WPG-120 is ready now.
Figure 3 WPG-120 Projection Screen
3) Make sure your PC WLAN is enabled already, and
connect your PC with WPG-120 follow the on screen
information as Figure 3.
4) Open your browser and it will redirect to WPG-120 main
page automatically, or you can enter the IP address to
access the WPG-120 web home page.
The default IP address of WPG-120 is 192.168.1.1 or
refers to the IP address shown on the left corner of
projector screen.
Figure 4 WPG-120 Web Main Screen
l
l
– 1 – – 2 – – 3 –