PLANET WPG-130N - Manual

Note
– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
2. Physical Installation
3. Hardware Installation
– 7 – – 8 –
– 5 – – 6 –
Front Panel Description
Rear Panel Description
WPG-130N Quick Guide CD-ROM
World-Wide Adapter Set VGA Adapter Power Adapter
Further Information :
The above steps introduce simple installations and
configurations for WPG-130N. For further configurations of the
utility (WPG), Virtual Extended Screen, and Wi-Fi AP-Client etc,
please refer to the user’s manual in the CD. If you have further
questions, please contact the local dealer or distributor where
you purchased this product.
2011-E60050-001
Thank you for choosing PLANET WPG-130N. Before
installing the device, please verify the contents inside the
package box.
If there is any item missed or damaged, please
contact the seller immediately.
Step 1: Please turn on your projector first, and connect
the WPG-130N to the projector via VGA port.
Now you can power on WPG-130N.
Step 2: When the projector shows the default screen as
below, it indicates WPG-130N is ready now.
(US/EU/UK)
VGA Connector
Power LED
Power Connector
(5V DC Input)
Reset Button
Step 2: Open the web browser and it will redirect to
WPG-130N home page automatically, or you can
enter the default IP address 192.168.1.1 to
access it.
Step 3: Download the client utility (WPG) of Windows
7/Vista/XP and execute it. After installing the
program, you’ll see WPG shortcut on your PC
desktop.
Step 4: Launch WPG on the desktop, and then input the
login code. The login code can be found from the
projector screen.
Step 5: Click the button to start projection, or choose
one of the numbers 1~4 to project to the split
screen.
4. Software Installation – Windows
Step 1: Site survey the wireless signal of WPG-130N,
and connect your PC with it wirelessly.
Default SSID: WPG-130N
Default IP Address: 192.168.1.1
Default Username: admin
Default Password: admin
* The connection information can be found from the
projector screen.
Note
Please make sure the firewall in Windows will
allow the WPG software to pass through.
Power
Adapter
Power
Control panel for Screen Projection
Login Code Menu
Status Indicator
Software Installation – Mac OS X
WPG-130N
Quick Installation Guide
802.11n Pocket Presentation Gateway
Step 4: Launch WPG software and enter the login code.
Control panel for Screen Projection
Login Code Menu
Status Indicator
SSID: WPG-130N
Channel: 6
Security: OFF
Server IP: 192.168.1.1
Resolution: 1024 x 768
Version: 1.0.0.0
Step 2: Open the web browser and enter the default IP
address 192.168.1.1 to access the WPG-130N
home page.
Step 1: Enable your WiFi and connect to WPG-130N.
Step 3: Download the client utility (WPG) of Mac OS X
and execute it.