Network setup – PLANET WPG-210N User Manual
Page 47
PLANET 802.11n Wireless Presentation Gateway
WPG-210N
5.4.2. Network Setup
This page is used to configure the parameters for local area network which connects to the LAN port or
wireless interface. Here you may change the setting for IP address, subnet mask, DHCP, etc.
Figure 5-7-1
IP Setup
The page includes the following detailed fields:
Object
Description
IP Setup
Obtain IP address
automatically
If you select this option, the WPG-210N will detect the network
environment automatically.
When WPG-210N is connected to a LAN that has DHCP
server, the clients of WPG-210N will assign an IP by that
server and the built-in DHCP server of WPG-210N will be
disabled.
When the WPG-210N is connected to a LAN that does
not have any DHCP server, the built-in DHCP server of
WPG-210N will be enabled and the clients of WPG-210N
will obtain IP address by itself.
Or you can select this option to use the fixed IP address for
WPG-210N. (Default Settings)
IP Address
The default value is 192.168.1.1
Use the following IP
address
Subnet Mask
The default value is 255.255.255.0
47