PLANET CAM-IR554 - Manual (Page 2)

50 meter Infra-Red Outdoor Camera– CAM-IR554
 Sunshield
 Camera lens
 High efficiency infrared LED
 BNC connector
 DC connector
 Screw holes for bracket fixing
1. Packet Content
● CAM-IR554 x 1
● Quick installation guide x 1
● Stand Package (Stand + Screw pack) x 1
2. Installation
1. Please fix the CAM-IR554 to the bracket with screws
2. After installed finished, please place the camera to a suitable location.
3. Adjust the camera to the correct direction.
4. Connect video output connector to your DVR.
5. Connect a DC 12V power adapter to the Power Input connector.
Note
Before connect power adapter to camera, please make sure the power
output voltage is DC 12V (max. ±10%). If you can not sure this part, we
will suggest to use a DC 12V Switching power adapter. It can provide stably
power output for your camera system.
3. Specification
Product
Model CAM-IR554
Camera
Sensor SONY 1/3" CCD
Effective Picture Elements NTSC: 768 x 494, PAL: 752 x 582 (H x V)
Lens 8.0mm, f = 1.6mm
Minimum Illumination 0 LUX with built-in IR-LED
View Angle 8mm: H: 33 Degree, V: 25 Degree
Led
IR LED 35 Units of 850nm High Power IR LED
IR Project Distance 50 Meters
Video
Horizontal Resolution 600 TV lines
S/N Ratio More than 48 dB
White Balance Automatically (2500K~9500K)
Gamma Characteristic 0.45
Video Output 1 Vp-p Composite Video / 75 Ohms
Function
Gain Control Automatically
Auto Electronic Shutter NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/110,000s
Digital Wide Dynamic Range DWDR ON
2D Noise Reduction 2DNR ON
Synchronous System Internal, Negative sync
Environment
Operating -10°C to 50°C (14°F to 122°F)
Power Supply AC 90~260V / DC 12V
Power Consumption 8.5W
Water Resistance IP-66
Dimensions 110mm (φ) x 230mm (L)