PLANET DVR-1670 - Manual

1
Overview
This quick installation guide describes the objectives, organization and basic
installation of the PLANET DVR-470/DVR-1670 surveillance system, and offers
stand-alone system to build a distributed surveillance system, which can be
monitored over the Internet, and equipped with Hard Disc Drive that records the
video directly. Also, this guide shows you how to find additional information on
related products and services.
Package Content
„ 1 x DVR-470/DVR-1670
„ 1 x Power Cord
„ 1 x CD Disk
„ 1 x Quick Installation Guide
„ 1 x HDD Rack
„ 1 x 3.5” plastic panel
„ 2 x IDE Cable
„ 1 x Screws Kit
„ 1 x Remote Controller
„ 2 x 1-8 Loop Cable (DVR-1670)
NOTE:
If any of the above items are missing or damaged, contact your local
dealer for support.
Installing HDD
1. Open the DVR Case.
2. If you want to install 2 HDD for one IDE interface, please set master
and slaver HDD. If you want to install 4 HDD, please remove
CD-R/W mount bracket.
3. Place the HDD on the soleplate and fix it with screw.
4. Connect the ATA data cable correctly. The cable has three connectors
for DVR main board, master HDD and slaver HDD.
5. Plug the HDD power connector.
6. Cover and fix the DVR case.
NOTE
After install the HDD and first time power on the DVR, you must
format your HDDs. Please refer to section 6.4 in the manual of
bundled CD disk for the format procedure.