PLANET DVR-460 - Manual (Page 3)


5. Connect the HDD to the power connector and IDE BUS (make
sure to align the HDD precisely for pin connection) (Refer to Fig.
3)
6. Close the upper cover of the DVR and fasten all the screws you
loosened in the step 1. (Refer to Fig. 4 & 5)
NOTE:
ONLY use the power adapter supplied with DVR-
460. Otherwise, the product may be damaged.
Hardware Installation
USB
INP UT
DC 19V
V D /
1
LOOP
EXTERNAL I/O IR
INP U T
2
LOOP LOOP LOOP
3
INP U T
4
INP UT
LAN
ACT .
LINK
1
CALL MONITOR
IN OUT
1. Please connect your cameras to the Video Input (1~4).
2. Connect your monitor to “Monitor” connector.
3. Connect the LAN port to your switch/hub with a RJ-45 cable.
4. Connect IR reciver to the “IR” connector.
5. Connect the bundle power to the power connector (DC 19V).
6. Press this button to turn on your DVR-460.