Eclipse - Fujitsu Ten CD8445 - Manual (Page 126)

126
How to operate the Sound Adjustment Mode
Position selector setting (POSITION)
When the position of the listener's seat is selected, the time taken
for the sound to travel from the speakers to the listener can then be
adjusted in order to obtain a more natural sound orientation. This
deck allows up to four different positions to be set.
Turn the [SEL] button to select POSITION.
Press the [SEL] button.
The mode will change to position selector setting mode.
Turn the [SEL] button to select the setting item.
When the button is turned, the setting item changes in the
following order.
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
If the position selector has been set (to a setting other than OFF), the
BAL (balance) and FAD (fader) settings will be canceled.
[SOUND] button
[SEL] button [RTN] button
Front L Front R Front Rear OFF
CD8445.book 126 ページ ２００４年１２月１３日 月曜日 午前１１時３０分