Eclipse - Fujitsu Ten CD8445 - Manual (Page 72)

72
How to operate the CD player
How to operate the CD player
First press the [DISC MS] button for less than one second to switch to the
disc mode. It is assumed here that a CD has already been loaded into the
unit.
Listening to CDs
Press the [DISC MS] button for less than one second to
switch to the CD player mode.
This starts CD play.
Disc mode will switch from CD player ➔ Memory Stick player in
order each time the button is pressed.
If an external CD changer is connected, each additional press of the
[DISC] button will switch modes from CD changer 1
➔ CD changer
2 ➔ Memory Stick player ➔ CD player.
A changer or player with no discs loaded will be skipped.
● Playback may be intermittent when there is a scratch on a CD
or when the recorded side is dirty.
● Only two external CD changers may be connected.
[DISC MS] button
CD8445.book 72 ページ ２００４年１２月１３日 月曜日 午前１１時３０分