Eclipse - Fujitsu Ten CD8445 - Manual (Page 26)

26
ESN security operating procedure
How to operate the ESN (Key CD) security
How to program the Key CD
Check that the unit is in standby.
Press and hold the [FUNC] button, then button [6],
and hold both for more than one second.
A [SEC] message appears, in two seconds it will change to
[DISC].
Press the [OPEN] or [CD ] button.
The front panel opens; The CD8445 is now ready for your Key
CD in the CD slot.
Insert the CD into the slot.
A [SEC] message appears, then the Key CD is ejected.
Press the [OPEN] or [CD ] button.
The front panel closes.
● If a CD has already been inserted, a [SEC] message appears,
and then the front panel opens and the CD is ejected.
● If a security is activated, programming the Key CD is not
available.
Button [6]
[FUNC] button [OPEN] button [CD ] button
CD8445_03_E.fm 26 ページ ２００４年１２月１３日 月曜日 午後１時３８分