Switching audio control modes – Eclipse - Fujitsu Ten CD8445 User Manual
Page 46
46
Basic operation
Switching audio control modes
Various audio control modes may be fine-tuned using this procedure.
Press the [AUDIO CONTROL] button for less than one
second to select the item to be adjusted.
Modes will switch in the order shown below each time the button is
pressed.
When the audio control is set to the Advance mode:
When the audio control is set to the Normal mode:
*1: Adjustments cannot be made when the position selector or CS II
is ON.
*2: Setting cannot be made in FM mode.
VOL (VOLUME) Mode
Adjusts volume.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left: Decreases the volume.
BASS Mode
Adjusts bass level. Bass mode can be adjusted for each source
(CDP/CDC, FM and AM and Memory stick player).
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left: Softens low sounds.
[AUDIO CONTROL] button
VOL BAL*
1
FAD*
1
SVC*
2
NON-F
VOL BASS
MID
SVC*
2
NON-F
TREB
BAL*
1
FAD*
1
CD8445.book 46 ページ ２００４年１２月１３日 月曜日 午前１１時３０分