Eclipse - Fujitsu Ten CD8445 - Manual (Page 155)

155
How to operate the AREA SHOT function (U.S.A. only)
X
Turn the [SEL] button to select the saving file.
The selection file name is highlighted.
Press the [SEL] button.
The selected file will be saved. "READING" is displayed while data
is being imported. When reading has finished, [Completed] will
appear on the display and then it will return to the display for
selecting the function mode.
When using a Memory Stick:
Data downloaded from the ECLIPSE web site (E-iSERV) is saved to
folders created in the Memory Stick as shown below.
● Files that can be imported into your deck are created
automatically when downloaded from E-iSERV.
● All of searched route maps and guidance information are stored
in these automatically created files.
● The file name can be changed using 8 alphameric characters
(space cannot be used);
When using a CD-R:
● The deck can only import files from CD-R that have been written
in root directories.
● Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
*CD-ROMs written in MODE2_FORM2 cannot be read.
● The file name can be changed using 8 alphameric characters
(space cannot be used);
Do not turn the power or ignition switch off while reading. Interrupting
reading process might corrupt the data.
MSFTEN
AREA
File extension
XXXXXXXX.ast Automatic creation
User creation
File extension
XXXXXXXX.ast Automatic creation
CD8445.book 155 ページ ２００４年１２月１３日 月曜日 午前１１時３０分