Eclipse - Fujitsu Ten CD8445 - Manual (Page 71)

71
Basic operation
IV
Turn the [SEL] button to the left or right to select
characters.
Turn to the right: Advances the character forward in its type.
Turn to the left: Moves the character backward in its type.
Press the [SEL] button to select characters.
Press the [RTN] button.
Memo settings are now completed.
Deleting a memo
Press the number button corresponding to the
memo to be deleted for more than two seconds
while the power is turned off.
Press the [6] button for more than two seconds.
The memo will be deleted.
● To change the type of character to be entered, repeat steps 2
and 3.
● A maximum of 10 characters may be entered per memo.
● A maximum of 5 memos may be stored.
[SEL] button
[RTN] button Button [6]
[Symbol] Initial value [!] [Right direction]
!
→ " → # → $ → % → & → ’ → ( → ) → * → + → , → – → . → / → : → ; → < → = → > → ? → @ → ´ → _
[Upper-case alphabet characters] Initial value [A] [Right direction]
A
→B→C→...X→Y→Z
[Numeric characters] Initial value [1] [Right direction]
1
→ 2 → 3 → . . . 8 → 9 → 0
CD8445.book 71 ページ ２００４年１２月１３日 月曜日 午前１１時３０分