PLANET ICA-H312 - Manual (Page 42)

UPnP: To enable or disable the UPnP service here.
Friendly Name: Shows the friendly name of this device here.
UPnP NAT Traversal: When enabled, the device will attempt to configure port mapping in
a NAT router on your network, using UPnP™. Note that UPnP™
must be enabled in the NAT router first.
Port Range: The port range will open in NAT router.
External IP address: Show the IP address and port for WAN access through Internet. If
NAT traversal is configured successfully, user can use this IP
address and port to access this device.
42