PLANET ICA-HM240 - Manual (Page 66)

65
3.13 Event Server Configuration
3.13.1. FTP Server
You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to
send the alarm message to an FTP server, it will need to configure parameters here and also add
at least one event schedule to enable event triggering as SMTP.
Name User can specify multiple FTP paths as wish. Therefore, user
needs to specify a name for each FTP setting.
FTP Server Type the server name or the IP address of the FTP server.
Test Check the FTP server whether this account is available or not.
FTP Login name Type the user name for the FTP server.
FTP Login Password Type the password for the FTP server.
FTP Port Set port number of FTP service.
FTP Path Set working directory path of FTP server.
FTP Passive Mode Select passive or active mode connecting to FTP server.