PLANET NVR-1610 - Manual

Installing the Hard Disk Drive
1. Removing the screws on the side.
2. Push the top housing forward, then lift it up.
3. Removing the screws on the HDD Tray left and right side.
HDD
Tray
4. Insert the HDD to HDD tray. Please push the HDD until the SATA connect is connected
properly, and lock the HDD Screw on left and right side.
HDD
5. If there is a second HDD, please repeat the step 4 to install it.
6. Place the top housing back and secure it with the bottom housing.
7. Connect the bundle power adapter to the power connector in rear panel.
8. Press power button to power on your NVR.