ProSoft Technology AN-X-MOD - Manual (Page 10)

Page 6 AN-X-MOD (Master) November 2011
Quick Start
Step See page
1 Install the AN-X Windows software 5
2 Power up the AN-X, connect it to Ethernet and use
AnxInit to assign it an IP address 7
3 Connect AN-X to the Modicon S908 network 4
4 Use the AN-X web interface to autoconfigure the
Modicon network and ControlLogix configuration 18
5 Configure the AN-X in RSLogix 5000 31
6 Scan I/O, read inputs and write outputs
7 Use the web interface to create alias tags for
RSLogix 5000 36
8 Import the tags into RSLogix 5000 37
9 Use the tags to access data