ProSoft Technology AN-X-MOD - Manual (Page 36)

Page 32 AN-X-MOD (Master) November 2011
Set the Slot to 16. Set the chassis size to 17.
Set the Comm Format to None.
Set the IP address to match the AN-X module.
Set Electronic Keying to Disable Keying.
Record the Name as it is used to create tags to access the data.
2. Add Generic modules for each required connection
Set the parameters as shown. Set the Slot to 0 for the first connection, 1
for the second connection, and so on.
3. Set the RPI for each connection. . The range is 5.0 ms to 750 ms.