ProSoft Technology AN-X-MOD User Manual
Page 20
Advertising
![background image](/files/866186/content/doc020.png)
Page
16
AN-X-MOD (Master)
November 2011
Enter an IP Address. In this case we chose 192.168.0.105
Enter the same Subnet mask and Default gateway that you entered for the
computer. The default gateway address does not exist on the network
but AN-X requires that the field have a valid entry.
Click Finish to accept the settings.
Select Utilities/Restart AN-X to restart AN-X with the new parameters.
When the AN-X has restarted (SYS LED is solid green), select
Utilities/Locate All AN-X Modules
and confirm that the AN-X is found
with the new parameters.
Advertising