UMIDIGI Touch - Manual (Page 8)

UMi Touch User’s Manual
8
After a paired devices, the system will show the paired and other equipment available
Pairing and connection of Bluetooth headset
1) Enter settings.
2)Select Bluetooth box,then open bluetooth box, then your phone will scan for the Bluetooth devices
within range ,and show the founded devices in the list under the icon.
Tips：
If the list can’t find your equipment, touch scanning equipment to re-scan it.
Make sure that the devices wanted are under the detected mode.
3) Touch headset in the equipment list to finish the connection.
Notices：generally Bluetooth devices need password to be paired, often use「0000」as the default
password.
4)The pairing and connecting status will show under the headset in the Bluetooth devices list. When the
headset connected to your phone, the status box will show this icon（ ）means connected. Then you can
use the headset to make or receive callings.