Ricoh Pentax К-1 - Manual (Page 52)

3
Shoo
ting
50
5
Select the Noise Reduction
level for each ISO setting.
Available operations
6
Press F.
The screen of Step 3 reappears.
7
Press F twice.
Choose the part of the sensor to use for measuring brightness
and determining the exposure.
1
Turn R while pressing
2
.
t Memo
• The metering method can also be set in [AE Metering] of the
A 1 and C1 menus.
R Shows the next/previous page.
M Resets the Noise Reduction level to the
default setting.
1
100 100
200
200
400
400
800
800
1600 1600
3200
3200
6400
6400
ISO ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
High-ISO NR High-ISO NR
Reset Reset
AE Metering A 1/C1
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit conditions, this mode
automatically adjusts the exposure.
B
Center-
weighted
Meters the brightness with an emphasis
on the center of the sensor.
The sensitivity increases at the center and
no automatic adjustment is performed
even in backlit conditions.
C Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.
1/ 1/ 250 250
1600 1600
FF 5.6 5.6
99999 99999
99999 99999