Ricoh Pentax К-1 - Manual (Page 61)

3
Shoo
ting
59
1
Select T on the Drive
Mode screen and press B.
2
Use CD to select T, 1, or U.
Proceed to Step 6 when T is selected.
3
Press G.
4
Select the operation mode.
5
Press E.
The screen of Step 1 reappears.
6
Set the number of shots and bracket value.
Available operations
7
Press E.
The camera returns to standby mode.
8
Shoot.
After pictures are taken, the camera returns to standby
mode.
t Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the E1
menu.
• The following settings for Bracketing can be set in the E2
menu.
• The bracket value can also be changed by the Smart
Function. (p.19)
Bracketing
T Bracketing
1 Bracketing + Self-timer
U Bracketing + Remote Control
±0.3EV ±0.3EV x3 x3
Bracketing Bracketing
Cancel Cancel OK OK Reset Reset
Bracketing Bracketing
Self-timer Self-timer
Cancel Cancel OK OK
Bracketing Bracketing
Remote Control Remote Control
Cancel Cancel OK OK
Q
Sets the number of shots.
R Changes the bracket value (up to ±3
EV).
J R Adjusts the exposure compensation
value.
M Resets the compensation value to the
default setting.
11 Bracketing Order
Changes the shooting order of
pictures.
12 One-Push Bracketing
Takes all pictures with one
release of the shutter.