Ricoh Pentax К-1 - Manual (Page 69)

3
Shoo
ting
67
The outcome of Cross Processing varies each time a picture is
taken. If you take a cross processed image that you like, you
can save the Cross Processing settings used in the image so
that you can repeatedly use the same settings.
1
Press B in single image display of playback
mode.
The playback mode palette appears.
2
Select j and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3
Use Q to select a cross
processed image.
4
Select the “Favorite” number 1, 2, or 3 to save
the settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of “Custom Image”
(p.66), and selecting one of the Favorite settings 1 to 3 for the
parameter.
1
Select [Digital Filter] in A3 or C2 menu and
press D.
The Digital Filter setting screen appears.
2
Select a filter.
Select [No Filter] to not shoot with
a digital filter.
Available operations when shooting with the
viewfinder
Proceed to Step 6 if you do not need to change the
parameters.
3
Press G.
The parameter setting screen appears.
Saving the Cross Processing Settings of a
Captured Image
100-0001 100-0001
Saves this image's Cross Saves this image's Cross
Processing settings Processing settings
Save as Favorite 1 Save as Favorite 1
Save as Favorite 2
Save as Favorite 2
Save as Favorite 3
Save as Favorite 3
Cancel Cancel OK OK
Digital Filter A 3/C2
Extract Color
Replace Color
Toy Camera
Retro
High Contrast Shading
Invert Color
Unicolor Bold
Bold Monochrome
Main switch to U Uses Digital Preview to preview
the background image with the
selected effect applied.
H Saves the preview image (only
when the image can be saved).
Extract Color Extract Color
Cancel Cancel
Parameter Adj. Parameter Adj.
Check Check OK OK