Basic operation n switching the screen size – Sharp PN-60TW3 User Manual

Page 28

Advertising
background image

28

E

Basic Operation

n

Switching the screen size

Even when the screen size is changed, the display may remain the same depending on the input signal.

WIDE

PC input

Displays image so it fills the entire screen.

AV input

An image with a 4:3 aspect ratio is stretched to fill the entire

screen.

ZOOM 1

PC input

An image with a 4:3 aspect ratio is enlarged to fill the entire screen

without changing the aspect ratio. The edges of the image may be

cut off.

AV input

ZOOM 2

PC input

Use this size if ZOOM 1 cuts off the subtitles.

AV input

NORMAL

PC input

Displays image so it fills the screen without changing the aspect

ratio of the input signals.

AV input

Displays the entire image of the aspect ratio of 4:3 without

changing the aspect ratio.

Dot by Dot

PC input

Displays the dots of the signals input from the connected PC as

the corresponding dots on the screen.

AV input

Displays the dots of the input signals as the corresponding dots on

the screen.

TIPS

• Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial

or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright

Law, so please be careful.

• When dual-screen display is selected, the screen size cannot be changed.

• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original

image (e.g. TV broadcast or video input from external equipment).

• When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this

monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen

size to “NORMAL”.

• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen

size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the

edges of the screen. This is due to the characteristics of the software, and is not a malfunction.

• Depending on the original image size, black bands may remain at the edges of the screen.

Advertising
This manual is related to the following products: