Sharp PN-60TW3 - Manual (Page 64)

64
E
Specifications
n Product Specifications
Model PN-70TW3 PN-60TW3
LCD component 70" Class [69-1/2 inch (176.6cm)
diagonal] TFT LCD
60" Class [60-1/16 inch (152.5cm)
diagonal] TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors Approx. 1.06 billion colors
Pixel pitch 0.802 mm (H) × 0.802 mm (V) 0.692 mm (H) × 0.692 mm (V)
Max. brightness (typical) 300 cd/m 2 * 1
Contrast ratio (typical) 3,000 : 1
Viewing angle 160° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 60-9/16 (W) x 34-1/16 (H)
(1538.9 x 865.6)
52-5/16 (W) x 29-7/16 (H)
(1329.1 x 747.6)
Computer input signal Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green *2 ,
Composite sync (TTL: positive/negative) *2
Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play VESA DDC2B
Power management VESA DPMS
Input terminals PC/AV HDMI x 3
PC Mini D-sub 15 pin, 3 rows x 2
DisplayPort x 1
Audio 3.5 mm mini stereo jack x 2
Serial (RS-232C) 3.5 mm mini jack x 1
Output terminals Video/Audio DisplayPort x 1
Audio 3.5 mm mini stereo jack x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output (internal/external) 10 W + 10 W/10 W + 10 W 6 Ω
Touch Panel Detection method Infrared blocking detection method
PC connector USB (2.0 compliant) (Type B) x 2
Touch pen Wireless communication method
(2.4 GHz, IEEE 802.15.4 compliant, DS-SS method)
Touch pen adapter port USB (2.0 compliant) (Type A)
Wireless controller Wireless communication method
(2.4 GHz, IEEE802.11b/g/n)
(5 GHz, IEEE802.11a/n)
LAN terminal 10 BASE-T/100 BASE-TX
USB port USB (2.0 compliant) (Type A)
Wireless adapter port USB (2.0 compliant) (Type A)
Power requirement AC 100 V - 240 V, 2.7 A, 50/60 Hz AC 100 V - 240 V, 2.3 A, 50/60 Hz
Operating temperature * 3 * 4 41°F to 95°F (5°C to 35°C)
Operating humidity* 4 20% to 80% (no condensation)
Power consumption
(Maximum / input signal waiting mode * 5 /
standby mode * 6 )
235 W / 25.0 W / 3.5 W 190 W / 25.0 W / 3.5 W
Dimensions (excluding protrusions) inch (mm) Approx. 64-13/16 (W) x 3-11/16 (D)
x 39-3/4 (H) (1647 x 94 x 1010)
Approx. 56-9/16 (W) x 3-11/16 (D)
x 35-1/16 (H) (1437 x 94 x 890)
Weight lbs. (kg) Approx. 134.5 (61) Approx. 105.9 (48)
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness.
*2 D-sub input terminal only.
*3 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*4 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*5 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.
*6 When POWER SAVE MODE is set to OFF. When POWER SAVE MODE is set to ON: 0 . 5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.