Epson 4000 - Manual (Page 100)

3.
Select Change System Settings.
4.
Select Display.
5. From the Display menu, select Other (Requires disk
provided by a hardware manufacturer).
6. When the program prompts you to insert your display
driver diskette and displays the path A : \, insert the Drivers
diskette and press Enter.
You see a list of drivers and their associated resolutions.
7. Select the driver you want and press Enter.
8. When you see Accept the configuration as shown
above, press Enter.
9. Follow the rest of the instructions on the screen and in your
Windows documentation to complete the installation.
To change your VGA resolution, you can run the Setup
program from within Windows or you can run the SetRES
utility described in the next section.
SetRES
The SetRES utility allows you to change the screen resolution,
the number of screen colors, and the font size for Windows 3.1
applications.
Before you can use the SetRES utility, you must install the
Windows VGA drivers as described on page 6-3. As the
INSTALL program copies the drivers, it also installs the SetRES
utility in your Windows program directory and creates a
SetRES utility icon in your Windows program manager.
To start the SetRES utility, open the SetRES icon.
6-4 Installing VGA and IDE Drivers