Epson 4000 User Manual
Page 88
Advertising
6. Turn the drive and the mounting bracket over, then slide
the slots in the mounting bracket under the tabs at the base
of the computer until the tabs hold the bracket in place.
7. Secure the mounting bracket with the retaining screw.
Note
If the drive does not fit within the internal bay, you can
move the mounting frame toward the diskette drive bays
and align only one set of the slots on the mounting
bracket with the tabs on the computer. In this case, you
insert the retaining screw in the front slot on the
mounting bracket as shown below.
5-12
Installing and Removing Drives
Advertising