Epson 4000 - Manual (Page 39)

Exiting the SETUP Program
When you leave the SETUP program, you can save your
settings and reboot your system, or exit SETUP without saving
your settings. You can also return all values to the factory
defaults.
To leave the SETUP program, press Esc from any SETUP
screen. From the SETUP Main Menu, you can perform the
following functions:
Load ROM
Default Values
Loads the factory default settings
stored in ROM back into CMOS. If
you change your system
configuration using the SETUP
program and then have problems,
you can load to ROM values to boot
the system and start over.
Load Values
from CMOS
Loads the current values stored in
CMOS for all SETUP options. This
ignores any changes you have
made through SETUP.
Save Values
Saves the changes you have made
to CMOS to your configuration to CMOS.
Now press Esc to restart your computer.
Running the SETUP Program 2-11