Epson 4000 - Manual (Page 16)

How to Use This Manual
This manual contains the information you need to get the best
results from your computer. You don’t have to read everything
in this book; see the following chapter summaries to find the
sections you need.
Chapter 1 provides simple instructions for setting up your
system and connecting peripheral devices such as the monitor
and printer.
Chapter 2 describes how to run the SETUP program to
define your computer’s configuration. You may need to do
this the first time you use your computer. If you change the
configuration later, you will need to run it again.
Chapter 3 covers general operating procedures, such as
resetting the computer, using the password, and changing the
processor speed.
Chapter 4 describes how to remove and replace the computer’s
cover, change jumper settings, and install optional equipment
such as microprocessor upgrades, option cards, and memory
modules.
Chapter 5 explains how to install and remove disk drives.
Chapter 6 describes how to install the VGA and IDE drivers.
Chapter 7 contains troubleshooting tips.
Appendix A lists the specifications of your computer, the
operating environments that have been tested on your system,
and options available from Epson.
At the end of this manual you’ll find a Glossary, an Index, and
a list of international marketing locations.
Introduction 5