Option card problems, The printer prints, Information – Epson 4000 User Manual

Page 113: Garbled

Advertising
background image

The printer prints

garbled

information.

Check the printer manual for the printer’s correct DIP switch or

control panel settings.

Also, make sure you have the proper drivers installed for your

printer and make sure you’ve selected the correct printer

within your software application.

Option Card Problems

A new/y installed option curd is not working correctly.

Make sure the option card is installed correctly and is

well-seated in its slot. Run the SETUP program to update your

computer’s configuration after you install the card. Also,

perform setup procedures for any software you are using with

the option card.

See the documentation that came with the option card to set

any necessary DIP switches or jumpers on the card.

The computer may also have some jumpers that must be set for

the option card to work properly. See Chapter 4 for system

jumper information.

Your system may need to operate at the slower processor speed

to access the device. Try reducing the processor speed (see

Chapter 3).

Make sure you install option cards that meet the system’s

power requirements. See Appendix A for power requirements.

Note

You cannot install an optional video display card in this

computer.

Troubleshooting

7-11

Advertising