Transporting the projector – Epson Home Cinema LS11000 2500-Lumen Pixel-Shift 4K UHD Laser 3LCD Projector User Manual
Page 126
126
7.
Safely remove the projector's removable drive from the computer, then disconnect the USB cable
from the projector.
The firmware update starts.
While the firmware is updating, the status indicators on the projector start flashing and the cooling fans
run at high speed (this is normal). After the update is complete, the projector enters standby mode. If
Direct Power On
is enabled, the projector restarts automatically.
After the update is complete, check the
Version
setting in the
Management
>
Information
menu to
confirm that the firmware was updated successfully.
Parent topic:
Transporting the Projector
The projector contains precision parts, some of which are glass. Follow these guidelines to transport,
ship, or store the projector safely:
• Remove any equipment connected to the projector.
• Center the lens position using the
Lens
button.
Caution:
If you transport the projector when the lens is not centered, the lens shift mechanism may be
damaged.
• Make sure the lens shutter is closed.
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with
cushioning around it and mark the box "Fragile."
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the projector. Mark the box "Fragile."
Note:
Epson shall not be liable for any damages incurred during transportation.
Parent topic:
Maintaining and Transporting the Projector
Related tasks