Epson Home Cinema LS11000 2500-Lumen Pixel-Shift 4K UHD Laser 3LCD Projector User Manual
Page 76
Advertising
76
5.
Select
On
and press
Enter
.
6.
Select the
Select Color
setting and choose one of the following:
•
R
to adjust the red color convergence.
•
B
to adjust the blue color convergence.
7.
Select the
Pattern Color
setting and press
Enter
.
8.
Select
Start Adjustments
and press
Enter
.
9.
Select one of the following:
• Select
Shift the whole panel
to adjust the whole panel at the same time. (This is not
recommended, as usually only certain areas of the panel need to be adjusted.) Go to the next
step.
• Select
Adjust the four corners
to adjust the corners of the panel one at a time. (This is
recommended in most cases.) Skip to step 14.
10. Press
Enter
.
Advertising