Dell C2723H 27" Video Conferencing Monitor - Manual (Page 78)

78
│
Operating the Monitor
NOTE: If you select Yes for any one of the features mentioned above,
the message will not appear next time you intend to change the
settings of these features. When you perform a factory reset, the
message will appear again.
You will see the following message before the Lock function is activated:
NOTE: The message may be slightly different according to the selected
settings.
When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD .
NOTE: The message may be slightly different according to the
connected input signal.