Connecting the monitor for dpbs for the first time – Dell UltraSharp 38" 1600p Curved Monitor User Manual
Page 47
Advertising
Setting up the monitor
│
47
Connecting the monitor for DPBS for the first time
For the first time setting up the DPBS function:
1.
Make sure both the PC and the monitor are OFF.
2.
Press the monitor power button to turn ON the monitor.
3.
Connect the USB-C cable from the PC to the monitor.
4.
Both the monitor and PC will turn ON normally. If not, press either the monitor
power button or PC power button to boot up the system.
NOTE: Ensure that Dell Power Button Sync is set to On. See
.
Advertising