Eizo ColorEdge CS2400S 24.1" Monitor - Manual (Page 10)

1 | Introduction
10
1.2.2 Rear
5
2
1
6
12
3
9 10 11
4
8 7
1. Handle This handle is used for transportation.
2. Security lock slot Complies with Kensington's MicroSaver security system.
3. Lock button Use this button to remove the monitor from the stand.
4. USB-A connector
(downstream)
Connects to a peripheral USB device (see 8.1 Using the USB Hub
Function [ } 39] ).
: USB 5Gbps
: USB 2.0
5. Cable holder Holds the monitor cables.
6. Stand *1 Adjusts the height and angle (tilt and swivel) of the monitor. The
monitor can also be rotated vertically.
7. Main power switch Turns the main power on or off.
: On, : Off
8. Power connector Connects the power cord.
9. HDMI connector Connects to an external device with HDMI output.
10. DisplayPort connector Connects to an external device with DisplayPort output.
11. USB-C connector
(upstream)
Connects to an external device with USB-C output. This also
transmits the USB signal that is necessary for using software that
requires a USB connection.
12. USB-B connector
(upstream)
Connect using USB cable when using software that requires a USB
connection. The blue connector.
*1 An optional arm (or optional stand) can be attached by removing the stand section.