Eizo ColorEdge CG2420 24" 16:10 Hardware Calibration IPS Monitor - Manual (Page 17)

- 17 -
Chapter 2 Basic Adjustments/Settings
2-3. Switching the display mode (color mode)
This function allows easy selection of a display mode according to monitor application.
● Display Modes
Color Mode Purpose
Standard Mode Adjust color using the monitor's Setting menu.
Custom Select for configuring color settings according to your preference.
Adobe ® RGB Suitable for color matching with Adobe ® RGB compatible peripherals.
sRGB Suitable for color matching with sRGB compatible peripherals.
Calibration Mode (CAL mode) Adjusts the monitor’s color using the “ColorNavigator 6” color management software.
CAL1 Displays the screen adjusted by ColorNavigator 6.
CAL2
CAL3
Note
• The Setting menu and the Mode names cannot be displayed at the same time.
• You can disable specific mode selections. For more information, see “Mode Skip” (page 26) .
• The adjustment result of ColorNavigator 6 is reflected in each of the following modes, depending on the connector used for connecting the monitor and PC.
- CAL1 : DVI
- CAL2 : DisplayPort
- CAL3 : HDMI
• The CAL mode cannot be selected for connectors not connected to the PC.
• When you install ColorNavigator 6, the application will run as the resident software, and the color mode will become CAL mode. To use other modes, you will need to configure
the settings so that ColorNavigator 6 is not the resident software.