Eizo ColorEdge CG2420 24" 16:10 Hardware Calibration IPS Monitor User Manual
Page 34
Advertising
- 34 -
Chapter 6 Reference
Attaching the Optional Arm (Optional Stand)
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down.
2.
Remove the stand.
As shown below, keep the lock button pressed down (
1
) and slide the stand towards the stand base until it stops (
2
). Then, lift the stand up (
3
).
(3)
(2)
(1)
(1)
3.
Attach the arm or stand to the monitor.
Use the optional VESA mount screws when attaching the arm or stand.
Advertising