Chapter 6 reference, 1. attaching the optional arm – Eizo ColorEdge CG2420 24" 16:10 Hardware Calibration IPS Monitor User Manual
Page 33
- 33 -
Chapter 6 Reference
Chapter 6 Reference
6-1. Attaching the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm
Attention
•
When attaching an arm or stand, follow the instructions of their User's Manual.
•
When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. Use the VESA mounting screws supplied
with this product when attaching the arm or stand.
- Clearance between screw holes: 100 mm × 100 mm
- External dimensions of the VESA mount section of the arm or stand: 122 mm × 122 mm or less
- Plate thickness: 2.6 mm
- Must be strong enough to support weight of the monitor unit (excluding the stand) and attachments such as cables.
•
When using an arm or stand, attach it to meet the following tilt angles of the monitor.
- Up 45˚, down 45˚
•
Connect the cables after attaching an arm or stand.
•
Do not move the removed stand up and down. Doing so may result in injury or equipment damage.
•
The monitor, arm, and stand are heavy. Dropping them may result in injury or equipment damage.
•
When installing the monitor in portrait mode, turn the monitor screen 90˚ in clockwise direction.