ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 29)

Menu Operation 29
7.5 User Storage
The camera saves data such as user setups and frame grabs to a USB-C
memory stick. Look files, frame lines and software updates can be loaded
into the camera from the memory stick.
The USB-C slot (1) is located behind the media door, above the record-
ing media slot. Slide down the media door release (2) to open the media
door.
The camera supports exFAT formatted memory sticks using one partition
within a Master Boot Record (MBR) partition table and a maximum ca-
pacity of 256 GB. A special folder structure is used in order to work with
the camera.
Prepare Folder Structure
The camera can only load files from a correctly prepared USB medium with the required folder
structure. Preparing the folder structure on the USB medium within the camera will not alter existing
folders and files on the USB medium.
► Open the media door and insert the USB medium.
► Select
MENU > Media > Prepare USB Medium to create the ALEXA 35 folder structure on the USB
medium:
ARRI/ALEXA35/ FRAMELINES
GRABS
LDA
LICENSES
LOG
LOOKFILES
SETUPS
SUP
SENSOR
TEXTURES
For frame line imports to camera
For stored frame grabs
For lens table import/export
For license file installation
For exported camera logfiles
For look file import/export
For import/export of user setups
For software update installation
For import/export of User Pixel Mask files
For Texture import
The USB icon on the HOME screen and in the Status Info indicates a connected medium.
A gray icon indicates that the medium is read only. An orange icon is displayed if the medi-
um is not supported.
USB Info
► Select MENU > Info > USB Info for additional information on the USB medium.