ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 98)

Lens & Electronic Control System (ECS) 98
22.7 Enable Lens Mount
You can disable the LDS contacts of the lens mount. Usually this is not necessary, but it can be helpful
when e.g. lenses with faulty lens data are used. Please note that as soon as an LDA lens table is
activated, the LDS contacts of the lens mount are switched off automatically. There is no need to switch
the mount off manually when using LDA lens tables.
► Select
MENU > Lens & ECS > Enable Lens Mount to enable/disable the lens mount contacts of the
lens mount.
A disabled lens mount is indicated through the LDS icon on the HOME screen as well as in the
Status Info.