ARRI ALEXA 35 Body & PL Mount Set (LBUS) - Manual (Page 46)

Look Settings 46
10.4 Look Intensity
The Look Intensity adjusts the level of look application to the LogC4 image, where 100% translates to
a fully applied look and 0% to a plain LogC4 image. The look intensity is stored as a metadata in the
ALF4 look file. When the look is loaded, the camera reads the metadata and applies the look intensity
accordingly. In this way, the look intensity of a look can be changed as often as desired.
► Select
MENU > Image > Look > Look Intensity to set the look intensity of the active look between
10% and 100%.
Info: The active look is stored in the clip metadata. Here, however, the set intensity is “burned” into the
look file with a recalculated LUT.