Panasonic TH-65CQ2U 65" 4K LED Commercial Display - Manual (Page 12)

12
English
If the TV is not going to be used for any prolonged
length of time, unplug the power supply plug from
the wall outlet.
• When storing the product for long periods with no
power supplied, do not store it in a location exposed
to direct sunlight.
Picture noise may occur if you connect / disconnect
the cables connected to the input terminals you
are currently not watching, or if you turn the power
of the video equipment on / off, but it is not a
malfunction.
Notes on Using Wired LAN
When setting up the TV at a place, where electric
statistic occurs often, take a sufficient antistatic
measure before start using.
• When the TV is used at a location, where static
electricity occurs often, such as on a carpet, a wired
LAN communication is disconnected more often.
In that case, remove static electricity and the noise
source that may cause problems with an antistatic
mat, and re-connect the wired LAN.
• In rare cases, the LAN connection is disabled due
to static electricity or noise. In that case, turn off the
power of the TV and the connected devices once and
then re-turn on the power.
The TV may not work properly due to strong radio
wave from the broadcast station or the radio.
(see page 44)
• If there is any facility or equipment, which outputs
strong radio wave, near the installation location, set
up the TV at a location sufficiently far from the source
of the radio wave. Or, wrap the LAN cable connected
to the LAN terminal by using a piece of metal foil or a
metal pipe, of which is grounded at both ends.
Request Regarding Security
When using this unit, take safety measures against
the following incidents.
• Personal information being leaked via this unit
• Unauthorized operation of this unit by a malicious
third party
• Interfering or stopping of this unit by a malicious third
party
Take sufficient security measures.
• Set a password for LAN control and restrict the user
who performs the control.
• Make your password difficult to guess as much as
possible.
• Change your password periodically.
• Panasonic Corporation or its affiliate companies will
never ask for your password directly. Do not divulge
your password in case you receive such inquiries.
• The connecting network must be secured by a
firewall, etc.
• When disposing the product, initialize the data before
disposing.
Cleaning and maintenance
First, remove the mains plug from the mains socket.
Gently wipe the surface of the liquid crystal panel or
cabinet by using a soft cloth to remove dirt.
• To remove stubborn dirt or fingerprints on the surface
of the liquid crystal panel, dampen a cloth with diluted
neutral detergent (1 part detergent to 100 parts
water), wring out the cloth firmly, and then wipe away
the dirt. Finally, wipe away all the moisture with a dry
cloth.
• If water droplets get inside the unit, operating
problems may result.
Note
● The surface of the liquid crystal panel is specially
treated. Do not use a hard cloth or rub the surface
too hard, otherwise this may cause scratches on the
surface.
Usage of a chemical cloth
• Do not use a chemical cloth for the liquid crystal panel
surface.
• Follow the instructions for the chemical cloth to use it
for the cabinet.
Avoid contact with volatile substances such as
insect sprays, solvents and thinner.
• This may cause damage to the cabinet or cause
peeling of the paint. Furthermore, do not leave it in
contact with a rubber or PVC substance for a long
time.
Disposal
When disposing the product, ask your local
authority or dealer about the correct methods of
disposal.